Holland Park electrician · Holland Park West & Tarragindi
Electrician in Holland Park, inside and out.
Need an electrician in Holland Park or Holland Park West? A lot of our work here happens outside, such as pool equipment, gate motors and underground power. Inside, we also fix tripping lights, replace power points and fit fans and smoke alarms. You get a clear price before work starts, then testing before we leave. We work Monday to Friday, with same-day where we can.
5.0★★★★★from 52 Google reviews
- Licensed, QLD licence 90386
- Regular in Holland Park
- Price agreed before we start
New pool equipment in Holland Park West, before we connected it to its own dedicated circuit.
“
Had these guys come round to sort some new lighting and power points. Super easy to deal with, showed up on time, no fuss, and cleaned up after. Proper quality job, would 100% get them back again.
★★★★★ Mark J., Google review
Licensed and insured
QLD electrical contractor licence 90386.
Price agreed first
You get the full price in the quote before we start.
Holland Park regulars
We work across Holland Park West and Tarragindi, so we’re usually close by.
Jobs we’re called for
Why Holland Park homes call an electrician
These are the jobs that come up most in Holland Park and Holland Park West, especially outside. Plenty can wait for a normal booking, although the first three are worth sorting soon.
Lights that keep tripping
When a lighting circuit trips, it usually points to one fitting, one cable or one switch. So we test it section by section until we find it.
Worn or failed power points
Old power points crack, loosen and fail, but the one behind the fridge works hardest. So we replace them, then test the circuit.
Hot or scorched fittings
A fitting that feels hot, buzzes or shows scorch marks needs checking soon. Turn it off, then call us.
Pool pumps and heat pumps
New pool gear often needs its own circuit, as well as weatherproof power. For example, we ran one underground, in conduit 600 mm deep, to a Holland Park West pool.
Gate motors and underground power
We trench, lay conduit and fit weatherproof power on a stand, so the gate motor has a proper supply.
Fans, lights and smoke alarms
We swap old lights for ceiling fans, including ones you’ve bought, and we upgrade smoke alarms before 2027. In the bathroom, we replace exhaust fans and IXL Tastics too.
A fitting that’s sparking or smells hot?
Keep away from it and, if you safely can, turn its circuit off at the switchboard. Then ring us. If there’s smoke or fire, get out and call 000 first.
How pricing works
How a Holland Park electrician quotes indoor and outdoor jobs
Reviewed by MJ, licensed electrician at M-Tech. QLD electrical contractor licence 90386. Updated September 2026.
Faults start with a diagnostic visit, and we’ll tell you the fee before we book it. For installs, we get the details or take a look, then give you one price. Nothing goes ahead until you approve it.
1
Indoor repairs
Replacing a power point or tracing a lighting fault is usually a short job, so it’s easy to fit in. Also, it pays to group small jobs into one visit.
2
Outdoor and underground work
Trenching, conduit and weatherproof power depend on the distance and the ground, so we measure first. For example, one gate supply needed about 15 metres of conduit.
3
Changes for landscaping
Planning a garden or a pool? We can lower or move existing conduit, so your landscapers have the clearance they need.
Also a Tarragindi electrician, and more
Holland Park and Holland Park West sit between Tarragindi, Greenslopes and Mount Gravatt, so we cover those streets just as easily. As a Tarragindi electrician, we also fitted a full set of interconnected smoke alarms in a family home. Closer to Coorparoo? Our Norman Park electrician page covers the inner east.
Holland Park electrician jobs from our records
These are real jobs from our records in Holland Park West, as well as one next door in Tarragindi.
Holland Park West
FoundA gate motor needed its own 240V supply, but it sat well away from the house.
DoneWe trenched and laid about 15 metres of conduit, ran the cable underground, then mounted a weatherproof power point on an in-ground stand.
Holland Park West
FoundA new pool heat pump needed a dedicated circuit and power points before it could run.
DoneWe ran a new circuit in conduit buried 600mm deep, fitted a 20A RCBO at the switchboard, then hardwired the heater and added weatherproof power.
Holland Park West
FoundA workspace needed a lot more power than it had.
DoneSo we installed suspended power points from the ceiling, two 15A power points on their own circuits and five new double power points.
Holland Park West
FoundA lighting circuit kept tripping, so the lights kept going out.
DoneWe found the fault on the circuit, fixed it, then tested the lights.
Holland Park West
FoundAn existing light had stopped working, and the owner wanted a fan there instead.
DoneWe removed the light and installed their DC ceiling fan, then tested it to AS/NZS 3000.
Holland Park West
FoundConduit we’d installed earlier sat too high for the landscaping plans.
DoneWe isolated the circuits, then lowered and refixed the conduit, so the landscapers had room.
Tarragindi
FoundA family home needed its smoke alarms brought up to the Queensland standard, so we planned a full set.
DoneWe installed ten interconnected alarms, six with 10-year lithium batteries and four hardwired, covering bedrooms, hallways and each storey.
Holland Park electrician jobs in photos
How it works
Booking a Holland Park electrician: how it works
01
Tell us the job
Call or message us first. If it’s outdoor work, a photo of the area and the switchboard helps a lot.
02
We book you in
Then we agree a time, with same-day where we can, Monday to Friday.
03
You approve the price
Next, we measure up or find the fault, and you approve the price before we start.
04
We finish and test
Finally, we complete the work, test everything and leave the site tidy.
Our work here
What our Holland Park electrician service covers
Most Holland Park jobs fit one of these four groups, so here’s what each includes.
Outdoor and underground power
We trench, lay conduit and fit weatherproof power for gates, pools, sheds and gardens, then test it all.
What it includes
- Gate motor power
- Pool pump and heat pump circuits
- Weatherproof power points
- Moving conduit for landscaping
Faults and tripping
When lights or power trip, we test first, so we find the real cause before any repair.
What it includes
- Tripping lighting circuits
- Dead or faulty power points
- Safety switches that trip
- Scorched or loose fittings
Fans and lighting
We also swap old lights for ceiling fans, including ones you supply, and fit new lights and dimmers.
What it includes
- Ceiling fans and DC fans
- Light replacements
- LED downlights
- Dimmers matched to LED
Smoke alarms and switchboards
In addition, we install interconnected smoke alarms and upgrade switchboards and safety switches.
What it includes
- Photoelectric, interconnected alarms
- Hardwired and 10-year battery alarms
- Switchboard upgrades
- Safety switches and RCBOs
Good to know
Do you work in Holland Park West as well?
Yes. Most of our jobs in this area are in Holland Park West, such as pool and gate power, fans and tripping lights. Holland Park itself is just as close, so both are easy for us.
How soon can a Holland Park electrician get here?
We aim for same-day where we can, Monday to Friday. When you call, we’ll give you an honest time, and we’ll tell you if we can’t make it soon enough.
Planning a pool or new landscaping?
Talk to us early. Pool gear often needs its own circuit, while underground cable needs the right depth and conduit. So it’s easier to run it before the turf and paving go down. While we’re there, we can also add weatherproof power points and check your safety switches.
At a glance
- Where: Holland Park and Holland Park West, plus Tarragindi, Greenslopes and Mount Gravatt.
- When: Monday to Friday, with same-day where we can.
- Pricing: one clear price before we start, and for faults, a diagnostic visit first.
- Testing: we test every job before we leave, and we leave the site tidy.
- Licence: QLD electrical contractor licence 90386, which you can check with WorkSafe Queensland.
Speed up your quote
- Your suburb, and whether the job is inside or outside
- What’s happening, or what you’d like installed
- A photo of the area, the fault or the switchboard
Related services
Often done on the same visit.
Lighting installation
New lights, switches and dimmers, fitted while we’re there.
Safety switch installation
Safety switches on every circuit, then trip-time tested before we leave.
Downlights and exhaust fans
LED downlights, bathroom exhaust fans and IXL Tastics, fitted while we’re in the roof.
Switchboard upgrades
When the old board has no room left for new circuits, or still runs on ceramic fuses.
Smoke alarm service and install
Same visit, same electrician. Hardwired, interconnected smoke alarms, done while we’re there.
Electrical fault finding
Power point dead or sparking? We find the fault before anything is replaced.
Renovation electrical
Kitchen or bathroom reno? We work to your builder’s rough-in and fit-off timing.
Residential electrician
One licensed team for every electrical job in your home, so you only make one call.
Why M-Tech
Why Brisbane homeowners book M-Tech.
We’re a small Brisbane team, so the electrician who turns up actually cares how the job ends. In short, there’s no call centre, no jargon and no upsell.
- Close by. We work in Holland Park West and Tarragindi, so we’re never far away.
- One price first. You approve it before we start, and there are no surprises on the day.
- Tidy outdoor work. We fill trenches back in and clean up, so the yard looks right.
- Tested every time. We test every repair and install before we leave.
- Licensed and insured. QLD electrical contractor licence 90386.
Google reviews
Rated 5.0 by 52 Brisbane customers
Where we work
Holland Park electrician for nearby suburbs too
Besides Holland Park and Holland Park West, we’re a regular electrician in Tarragindi, Greenslopes, Mount Gravatt and Coorparoo. Further away? See all our service areas, or just ask.
Inner east and riverside
Most days start in the inner east, around Norman Park, Bulimba and Cannon Hill.
Inner south
Coorparoo, Camp Hill and Carindale are regular stops between jobs.
South and south-east
We also head south through Mount Gravatt and Rochedale to Springwood.
Good to know
Holland Park electrician FAQs
Something specific? Then call 1800 549 545 and ask an electrician.
Are you an electrician in Holland Park?
Yes. We work in Holland Park and Holland Park West regularly, so it’s an easy trip for us.
Can you run power to a gate motor or shed?
Yes. For one Holland Park West gate, we trenched about 15 metres, laid conduit, then fitted a weatherproof power point on a stand.
Do pool heat pumps need their own circuit?
Often they do, because they draw a lot of power. For one pool, we ran a dedicated circuit in buried conduit with its own RCBO, then fitted weatherproof power points.
Are you also a Tarragindi electrician?
Yes, we also work in Tarragindi. For example, we fitted ten interconnected smoke alarms in a Tarragindi family home.
Can you move conduit for my landscapers?
Yes. We isolate the circuits first, then lower or reroute the conduit so it’s clear of the new garden.
Can you install a ceiling fan I’ve already bought?
Yes. In one Holland Park West home, we replaced a light with the owner’s DC fan, then tested it.
How do you price a job?
For faults, there’s a diagnostic visit first, and we tell you the fee before we book. For installs, you get one price before work starts.
Are you licensed?
Yes. M-Tech Electrical Solutions QLD holds electrical contractor licence 90386, and a licensed electrician does every job.
Can a Holland Park electrician upgrade my smoke alarms?
Yes. We fit photoelectric, interconnected alarms and test them together, then send your certificate. By 1 January 2027, every Queensland home needs them.
Free quote
Tell us about your Holland Park job.
Leave a few quick details, then we’ll call you back, talk it through and book a time. If you can, add photos of the area. Monday to Friday.
Or email admin@mtechelectricalqld.com.au
What happens next
- We call you back, usually the same working day
- Then we confirm what’s needed and book a time
- You approve the price before we start
“Excellent service from M-Tech Electrical Solutions! MJ attended and quickly diagnosed the issue with our safety switch.” ★★★★★ Michael B., Google review
Get a free quote
Four fields, under a minute. Prefer to talk? Then call instead.
Sending this doesn’t lock in a booking, because we’ll call to confirm a time first.
5.0★★★★★ from 52 Google reviews
Licensed and insured, QLD electrical contractor licence 90386